Canon Finisher-R1 Installation Procedure page 23

F-1-24
2) Remove the screw [1], and detach the upper rear
cover (small) [2] of the finisher.
3) Fix the fixing plate (rear) of the host machine in
place to the finisher using a stepped screw [3] (M4).
[3]
F-1-25
4) In the case of the Finisher-R1, open the front door
[1] and remove the 3 screws [2], then detach the front
cover [3].
[1]
[2]
[3]
[2]
F-1-26
5) In the case of the Saddle Finisher-R2, open the front
cover [1].
Chapter 1
[2]
[1]
15