Radio Test Environment - Huawei MU739 Hardware Manual

HUAWEI MU739 HSPA+ LGA Module
Hardware Guide
from all persons and must not be co-located or operating in conjunction with any other
antenna or transmitter. End-users must be provided with transmitter operation
conditions for satisfying RF exposure compliance. OEM integrators must ensure that
the end user has no manual instructions to remove or install the UC864-E/G/WD
/WDU module. Antennas used for this OEM module must not exceed 3dBi gain for
mobile and fixed operating configurations.

4.6.4 Radio Test Environment

The antenna efficiency, antenna gain, radiation pattern, total radiated power (TRP),
and TIS can be tested in a microwave testing chamber.
Huawei has a complete set of OTA test environments (SATIMO microwave testing
chambers and ETS microwave testing chambers). The testing chambers are certified
by professional organizations and are applicable to testing at frequencies ranging
from 380MHz to 6GHz. The test items are described as follows:
Passive Tests




Active Tests


Figure 4-1 shows the SATIMO microwave testing chamber.
Issue 01 (2011-08-24)
Antenna efficiency
Gain
Pattern shape
Envelope correlation coefficient
TRP: GSM, WCDMA, CDMA, TD-SCDMA, and LTE systems
TIS: GSM, WCDMA, CDMA, TD-SCDMA, and LTE systems
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
RF Specifications
45