16 VMIVME-7805/VME-7805RC Hardware Reference Manual
Table 1-1 VMIVME-7805/VME-7805RC Headers, Jumpers and Connectors
Connector
Function
J16
Mouse/Keyboard
J15
10/100/1000 GbE
J14
10/100 Mbit Ethernet
P2
IDE (Primary), Floppy
J12
USB port
J10
DVI Video
E10, E18, E19
Factory Reserved Do Not Use
E3
CMOS Clear Jumper
E11
Boot Continuation Jumper
2
E12
I
C Header
S6, S7
VME Switches
J1, J2, J3
PMC Site Connectors
P6
CompactFlash Connector
S8
Factory Configured (Default is ON)
J17
COM 1, COM 2
P1, P2
VME Backplane Connectors
NOTE
The BIOS has the capability (not currently enabled) of password protecting casual access to the
unit's CMOS set-up screens. The CMOS Clear jumper allows the user to clear the password in the
case of a forgotten password.
1.3.1 CMOS Password
To clear the CMOS password:
1. Turn off power to the unit.
2. Momentarily short the pins of E3 for approximately five seconds.
3. Power up the unit.
When power is reapplied to the unit, the CMOS password will be cleared.
Table 1-2 Clear CMOS (User Configurable) - Jumper (E3)
Select
Normal
Clear CMOS/Password
Table 1-3 Boot Continuation - Jumper (E11)
Select
Load Default settings and
continue booting on CMOS
error
Stop booting on CMOS error
Jumper Position
Open
Momentarily Short
Jumper Position
In
Out