Table of Contents
Advertisement
C.4 Ethernet Drivers Installation
To upgrade from a network connection:
1. Using your current operating system, establish a connection to the shared
network folder that contains the Setup files. If you have an MS-DOS or
network installation disk that contains network client software, you can use
that disk to connect to the shared folder. Your network administrator will be
able to provide you with this path.
2. At the command prompt, type the path to the file setup.exe.
3. Press ENTER.
4. Select Upgrade, and then click Next.
5. Follow the instructions that appear on your screen.
1. Insert CD-ROM 385-000027-000.
2. Right click on My Computer and select Manage.
3. In the left pane of the Computer Management window, select Device
Manager.
4. In the right pane, double click on the first Ethernet Controller under Other
Devices.
5. Click the Reinstall Driver button.
6. Click Next.
7. Select 'Search for a suitable driver for my device' and click Next.
8. Deselect 'Floppy disk drives' and select 'Specify a location'.
9. Click Next.
10.Click the Browse button and browse to the root of the CD-ROM inserted
earlier.
11.Browse into the WIN2K or WinXP (OS dependent) folder and then into the
i82540EM folder.
12.Click Open.
13.Click OK.
14.Click Next.
15.After files have been installed, click Finish.
16.Click Close.
17.Click X to close the Computer Management window.
Appendix C: OS and System Driver Software 75
Advertisement
Table of Contents
