Switching Options - ABB -free@home SAP/S.3 Product Manual

7.12.2

Switching options

Two-way circuit [01]
An actuator is connected with one or several sensors.
Group circuit [02]
Several actuators of the same type (e.g. all the lights in a corridor, all roller blinds of a room) are
combined in a group. The group acts like a single actuator and can be connected with sensors
or integrated into scenes (At "ON" all actuators of the group switch on. At "OFF" all actuators of
the group switch off).
Scene [03]
A scene creates a state that can be defined by the user. This, for example, allows the user to
create a "TV" scene that dims the living room light, switches off the lights in the corridor and
dips the blinds. Scenes cannot be switched on or off. When a scene is called up, always the
same, predefined state is established.
The states of the participants in a scene can be defined when the scene is created.
To switch a local scene, it can be linked with a sensor.
Fig. 29: Switching options
01 – Two-way circuit
02 – Group circuit
03 – Scene
Product manual 2CKA001473B9726
Commissioning
│47