ABB -free@home SAP/S.3 Product Manual page 29

Option B: Establishing the connection with the PC via WLAN
1. Energize the System Access Point. Ensure that the access point mode has been activated
(LED button lights up blue). If not, press the access point button to activate it.
2. Connect the PC with the WLAN of the System Access Point (SSID: SysAPXXXX).
Enter the password (see text on the rear side of the System Access Point, see Page Fehler!
Textmarke nicht definiert.).
3. Start your Internet browser.
Enter the IP address "192.168.2.1" in the address line of your browser and confirm it.
4. The connection to the System Access Point has been established.
Fig. 15: Connection with PC via WLAN
Product manual 2CKA001473B9726
1
3
2
4
Commissioning
│29