Links; Linking Actuator And Sensor - ABB -free@home SAP/S.3 Product Manual

7.12

Links

7.12.1

Linking actuator and sensor

The sensors and actuators created in step "Devices" can now be linked to implement simple
On/Off circuits, two-way circuits, scenes, etc.
1. First click/tap on the desired sensor [1] which is to operate the actuator and then on the
actuator [2].
2. Press the tick at the bottom right to take over the entries.
– A blue connecting line indicates the link between the two devices.
The configuration is transmitted automatically to the devices. The transmission can, depending
on the number of affected devices, take a number of seconds. During the transmission a
progress bar is displayed around the devices affected.
After the transmission has been completed, the sensor can be operated directly locally.
Fig. 28: "Devices" window
Product manual 2CKA001473B9726
Commissioning
│46