Identification - ABB -free@home SAP/S.3 Product Manual

7.10.1

Identification

If after positioning on the floor plan there are several possible devices in the pop-up window for
selection, the device which switches the desired function must now be selected.
Identification via serial number
Fig. 24: Identification via serial number
1. Compare the three-digit character code and the serial number of the identification label on
your device plan, or on the device with the numbers in the list, and in this way identify the
device you are searching for and, if necessary, also the channel.
Identification via switching (only suitable for actuators)
Fig. 25: Identification via switching
1. Select a device and a channel from the list.
2. Press the button in the detailed view of the device.
– The connected load is switched.
3. Repeat steps 1 and 2 until you have located the searched for device.
Product manual 2CKA001473B9726
Commissioning
│43