Allocating Devices To Rooms - ABB -free@home SAP/S.3 Product Manual

7.10

Allocating devices to rooms

In the next step the devices connected to the system must be identified. For this they are
allocated to a room according to their function and are given a descriptive name.
A table with all available applications is located in Chapter 4 "Setup and function" on page 11.
The application that is actually available depends on the devices connected to the system.
In the "Add device" bar only the devices/functions that are connected with the system are
displayed. They remain in the bar until they are shifted onto the floor plan. This means that the
list keeps getting shorter as the devices are being positioned.
In the "Add devices" bar select the desired application and pull it via drag and drop onto the
■
floor plan, see fig. "
A pop-up window opens which lists all the devices that are connected to the bus and
–
suitable for the selected application (e.g. all blind actuators, if the blind application has
been selected, see fig. "Fig. 23:" on page 42).
Fig
. 22: Dragging the application from the add bar
Product manual 2CKA001473B9726
. 22:" on page 41.
Fig
Commissioning
│41