ABB Endura AZ40 Manual page 2

Health & Safety
Document symbols
Symbols that appear in this document are explained below:
DANGER – Serious damage to health / risk to life
This symbol in conjunction with the signal word
'DANGER' indicates an imminent danger. Failure to
observe this safety information will result in death or
severe injury.
DANGER – Serious damage to health / risk to life
This symbol in conjunction with the signal word
'DANGER' indicates an imminent electrical hazard.
Failure to observe this safety information will result in
death or severe injury.
WARNING – Bodily injury
This symbol in conjunction with the signal word
'WARNING' indicates a potentially dangerous situation.
Failure to observe this safety information may result in
death or severe injury.
WARNING – Bodily injury
This symbol in conjunction with the signal word
'WARNING' indicates a potential electrical hazard.
Failure to observe this safety information may result in
death or severe injury.
WARNING – Bodily injury
High temperature
This symbol in conjunction with the signal word
'WARNING' indicates a potentially dangerous situation.
Failure to observe this safety information may result in
death or severe injury.
WARNING – Bodily injury
Pressurized equipment
Installation, operation, maintenance and servicing of
pressurized equipment must be performed:
— by suitably trained personnel only
— in accordance with the information provided in this
manual
— in accordance with relevant local regulations
2
CAUTION – Minor injuries
This symbol in conjunction with the signal word
'CAUTION' indicates a potentially dangerous situation.
Failure to observe this safety information may result in
minor or moderate injury. The symbol may also be used
for property damage warnings.
NOTICE – Property damage
This symbol indicates a potentially damaging situation.
Failure to observe this safety information may result in
damage to or destruction of the product and / or other
system components.
IMPORTANT (NOTE)
This symbol indicates operator tips, particularly useful
information or important information about the product
or its further uses. The signal word 'IMPORTANT
(NOTE)' does not indicate a dangerous or harmful
situation.
Safety precautions
Be sure to read, understand and follow the instructions
contained within this manual before and during use of the
equipment. Failure to do so could result in bodily harm or
damage to the equipment.
WARNING – Bodily injury Installation, operation,
maintenance and servicing must be performed:
— by suitably trained personnel only
— in accordance with the information provided in this
manual
— in accordance with relevant local regulations
Potential safety hazards
Process conditions and requirements
WARNING – Bodily injury
Environmental conditions
— High air / equipment / structure temperatures, poor
air quality and adverse environmental conditions
may be present when the process is running.
— It is recommended that the process is shut down
before performing these procedures.
— The process must be cool enough to enable
shutdown, disconnection and removal of the sensor
in a safe manner and in accordance with relevant
local regulations.
— Appropriate PPE, including mask and goggles must
be worn when preparing the process for these
procedures.
CI/AZ40-EN Rev. A