ABB Endura AZ40 Manual page 14

DANGER – Serious damage to health / risk to life
Sensor power switch SW1 supplies high voltage power (115 V or 230 V AC) to the sensor when set in the ON position.
This switch is NOT a transmitter safety isolation switch and is fitted for operational purposes only.
*Ensure mains connector is in correct position (115 V or 230 V) for application
Fig. 17 Mains power cable connections
14
High voltage power switch
transmitter to sensor –
DO NOT USE AS A
TRANSMITTER SAFETY
ISOLATION SWITCH
115 V*
230 V*
CI/AZ40-EN Rev. A