Quick Ip Call Mode; Answering A Call; Do-Not-Disturb - Huawei eSpace 6805 User Manual

Huawei IP Phone eSpace
User Manual
For example, if the destination IP address is 10.10.10.1, type 10*10*10*1. The * key
represents the dot.

Quick IP Call Mode

Dial an IP address in the same LAN by typing the last octet of the IP address. This
simulates a PBX function using the CMSA or CD without a SIP server. In this mode,
the controlled static IP address is recommended.
On the Advanced Settings page, set Use Quick IP-call Mode to Yes. When #xxx is
dialed (The range of x is 0–9 and xxx cannot be larger than 255.), a direct IP call is
initiated as aaa.bbb.ccc.XXX. aaa.bbb.ccc is the local IP address regardless of the
subnet mask. The numbers #xx or #x are also valid.
The following is an example.

10.10.10.2 calls 10.10.10.3 — dial #3, followed by SEND.

10.10.10.2 calls 10.10.10.23 –– dial #23, followed by SEND.

10.10.10.2 calls 10.10.10.123 –– dial #123, followed by SEND.
If the SIP server is configured, a direct IP-IP call still works. If you use the
STUN, the direct IP-IP call also uses the STUN. Set Use Random Port to
No when completing direct IP calls.

Answering a Call


An incoming call: The phone rings. The corresponding account LINEx blinks. Pick
up the handset, press
answer the call.

Multiple incoming calls: The call waiting tone is played. The next available line
will blink in red. Answer an incoming call by pressing the LINEx key.

Do-Not-Disturb

To block all incoming calls, you can enable the Do-Not-Disturb (DND) function. The
phone will not ring when an incoming call comes.
Method 1: When the phone is in idle mode, press DND to enable the DND function and
press DND again to disable the DND function.
Method 2: Toggle the DND function as follows:
Step 1
Press MENU.
Step 2
Select Preference by pressing the arrow keys, and then press MENU.
Step 3
Select Do Not Disturb by pressing the arrow keys and press MENU.
68105
, enable the headset, or press the blinking LINEx key to
28
5 Using the eSpace 6805