Table of Contents
Advertisement
Installation of this unit
Optional accessory
Purchase items suitable for your system configuration.
There are two types of drive interface cables (SAS
cables), distinguished by the shape of their server-side
connectors.
Type SFF-8088 Mini-SAS
Straight SAS cable 2.5 m (98.4q) (LB-XA25A0G)
∏
Branch SAS cable 2.5 m (98.4q) (LB-XA25B0G)
∏
Straight SAS cable 2.0 m (78.7q) (LB-XA20A0G)
∏
Branch SAS cable 2.0 m (78.7q) (LB-XA20B0G)
∏
Tools required
Torque screwdriver 0.3 to 1.6 Nm (2.7 to 14.5 in-lbs)
∏
*1
(bits #1 and #2)
Application: Installing modules and power source
Cage nut installation tool
∏
Application: Attaching cage nuts (recommended)
Nut driver for Hex Nut M6
∏
Application: Installation of the DC cable
1.8 mm (0.07q) width flat-blade screwdriver
∏
Application: Adjusting the adjustment trimmer on the
power supply shelf
Multimeter
∏
Application: Checking DC voltage
*2
DA power checker
∏
Application: Checking the installation of the DC power
source
Cutter knife
∏
Application: Opening packaging
Gloves
∏
Application: Performing the tasks and preventing
injury
Tape measure ( > 1 m (39.4q))
∏
Application: Checking rack dimensions
File
∏
Application: Removing burrs inside the rack
Inspection mirror
∏
Application: To help confirm a variety of items
Light
∏
Application: To help confirm a variety of items
UD guide check fixture (DSVY1001ZXX1)
∏
Application: Checking connection of gear racks
Preparatory work for installation
*2
13
Type SFF-8644 Mini-SASHD
Straight SAS cable 2.5 m (98.4q) (LB-XA25H0G)
∏
Branch SAS cable 2.5 m (98.4q) (LB-XA25J0G)
∏
Straight SAS cable 2.0 m (78.7q) (LB-XA20H0G)
∏
Branch SAS cable 2.0 m (78.7q) (LB-XA20J0G)
∏
0.09, 0.5, 1.5, and 2.7 mm (0.004, 0.02, 0.06 and
∏
0.11q) gap gauges
Application: Checking connection of gear racks and
installation of modules
3.6 TB Magazines (LM-BM36XB) : 4 pcs
∏
Application: Rack tests
*1 Tightening torque for the screws is as follows.
Screw size
1.6 Nm
M5
i/j10 %
0.5 Nm
M3/M2.6
i/j10 %
0.3 Nm
Thumbscrew
i/j10 %
≥ Cross-slot screwdriver bit #1 matches the M2.6 screw size,
and bit #2 matches all other screw sizes.
*2 Tools provided by Panasonic.
DA power checker
Torque specification
14.5 in-lbs
16 kgf-cm
i/j10 %
i/j10 %
4.5 in-lbs
5 kgf-cm
i/j10 %
i/j10 %
2.7 in-lbs
3 kgf-cm
i/j10 %
i/j10 %
UD guide check fixture
(DSVY1001ZXX1)
Advertisement
Table of Contents
