Communication Board; Connection Board Types; Mounting Procedure - Mitsubishi Electric A960GOT User Manual

6 HANDLING

6.6 Communication Board

6.6.1 Connection board types

6.6.2 Mounting procedure

6 - 25
The communication board is used to make the GOT interface compatible with the
system to be connected to.
For the details of the connection form, refer to the [GOT-A900 Series User's Manual
(GT Works Version5/GT Designer Version5 compatible Connection System Manual)].
The following connection board types are available.
Type
A9GT-QBUSS For bus connection, small connector type (For QCPU (Q mode))
A9GT-QBUS2S For multidrop bus connection, small connector type (For QCPU (Q mode))
A9GT-BUSS For bus connection, small connector type (For A/QnA/Motion controller CPU)
A9GT-BUS2S For multidrop bus connection, small connector type (For A/QnA/Motion controller CPU)
For Direct connection to CPU/Computer link connection/Microcomputer connection and
A9GT-RS4
RS-422 connection (Without clock function)
For Direct connection to CPU/Computer link connection/Microcomputer connection and
A9GT-RS2
RS-232C connection (Without clock function)
For Direct connection to CPU/Computer link connection/Microcomputer connection and
A9GT-RS2T
RS-232C connection (Incorporating clock function)
Description
1) Refer to [Section 6.2] and remove the slot cover.
2) Insert the convex portion of the communication
board into the concave portion of the GOT.
3) Securely press the communication board
against the GOT.
4) Tighten and fix the mounting screws (2 pcs.) of
the communication board in the specified torque
range.
MELSEC-GOT
6 - 25