Mitsubishi Electric A960GOT User Manual page 60

6 HANDLING
• When using a CC-Link dedicated cable between GOT and PLC
• When using a CC-Link dedicated cable between GOT and GOT
6 - 13
d) CC-Link connection (CC-Link dedicated cable)
• Peel the sheath ( with the length shown below) at both ends of the
cable, and expose the shield braided wire for grounding.
GOT side Ferrite Core
(ZCAT3035-1330)
130
(5.12)
Within 230 40
(9.06)
(1.57)
GOT side Ferrite Core
(ZCAT3035-1330)
130
(5.12)
Within 230 40
(9.06)
(1.57)
e) Ethernet Connection (Twisted pair shielded cable)
• Peel the sheath (with the length shown below) at both ends of the
cable, and expose the shield wire for grounding.
(ZCAT3035-1330)
GOT side
130
(5.12)
Within 230
40
(9.06)
(1.57)
f) Printer cable
• Wind cable shield material around the cable, and pull out the
grounding braided wire of the cable shield material with the length
shown below.
GOT side
Ferrite Core (ZCAT3035-1330)
Cable shield material
130
(5.12)
Grounding braided wire (50mm(1.97inch))
Within 150
(5.90)
PLC side
40
Within 400
(15.75)
(1.57)
40 Within 230
(9.06)
(1.57)
Ferrite core
Ethernet module side
Within 400
40
(15.75)
(1.57)
MELSEC-GOT
130
(5.12)
Unit : mm (inch)
GOT side
130
(5.12)
Unit : mm (inch)
Unit : mm (inch)
Printer side
Unit : mm (inch)
6 - 13