Removing The Document Length Sensor(Sr8,Sr9); Removing The Release Motor Hp Sensor(Sr11) - Canon D1 Service Manual

4
Parts Replacement and Cleaning Procedure > Clutch Solenoid Motor Fan PCB (DADF) > Removing the Release Motor HP Sensor(SR11)
2) Remove the last document detection sensor
- Connector 1 pc
x1

Removing the Document Length Sensor(SR8,SR9)

1) Detach the cover on the reverse side of the document
2) Remove the document length sensor
- Connector 1 pc
x1
SR8
SR9
4 Parts Replacement and Cleaning Procedure > Clutch Solenoid Motor Fan PCB (DADF) > Removing the Release Motor HP Sensor(SR11)
SR7
F-4-65
tray.(Refer to page 4-27)
F-4-66

Removing the Release Motor HP Sensor(SR11)

1) Open the feeder cover.
2) Open the DADF.
3) Detach the front cover.("Removing the Front Cover"(page
4) Close the DADF.
5) Remove the release motor HP sensor
- Connector 1 pc
x1
4-28
4-13).)
F-4-67
4-28