Image Position Adjustment(Reader); Leading Edge Non-Image Width; Left Non-Image Width - Canon D1 Service Manual

5
Adjustment > Image position adjustment(Reader) > Left Non-Image Width

Image position adjustment(Reader)

Copy 10 sheets from each pickup position to check that the image margin and non-image
area is within the standard.
• Each cassette
• Pickup tray
If it is not within the standard, go through the following procedures to adjust it.
CAUTION:
If changing the value of service mode item in this adjustment, enter the changed value
in the service label.

Leading Edge Non-Image Width

Service mode> COPIER> ADJUST> ADJ-XY> ADJ-X
Decrease the value.
(a decrease of '10' will decrease
the non-image width by 1 mm)
1st side of copy: 2.5+/-1.5mm
0 2 4 6 8 10 12 14 1618 20 5
Increase the value.
(an increase of '10' will
increase the non-image
width by 1 mm)
5 Adjustment > Image position adjustment(Reader) > Left Non-Image Width
Image leading
edge
F-5-1

Left Non-Image Width

Service mode> COPIER> ADJUST> ADJ-XY> ADJ-Y
Decrease the value.
(a decrease of '10' will
decrease the non-image
width by 1 mm)
5-2
Image edge
Increase the value.
(an increase of '10' will
increase the non-image
width by 1 mm)
1st side of copy: 2.5+/-1.5mm
0
2
4
5
6
8
10
F-5-2
5-2