Removing The Separation Pad; Replacing The Stamp - Canon D1 Service Manual

4
Parts Replacement and Cleaning Procedure > Consumable Parts Requiring Periodic Replacement and Cleaning Points (DADF) > Replacing the Stamp

Removing the Separation Pad

1)Open the feeder cover.
2)Remove two hooks to remove the separation pad.
x2
4 Parts Replacement and Cleaning Procedure > Consumable Parts Requiring Periodic Replacement and Cleaning Points (DADF) > Replacing the Stamp
1)Open the feeder cover and separation guide.
2) Using tweezers, remove the stamp
3)Using tweezers or the like, attach a new stamp.
Be sure to attach the new stamp with the stamp face up.
F-4-34
4)Close the feeder cover and separation guide.
F-4-35

Replacing the Stamp

Caution:
If the stamp is floating, a jam can occur. Be sure to push in the stamp until it clicks.
4-17
F-4-36
4-17