Mitsubishi Electric MELSEC iQ-R Series User Manual page 90

■[Connection Information] tab
This tab displays the online status information of the IO device.
This tab can be used when diagnostic mode is enabled. ( Page 67 Devices)
Item
Connection State
PROFINET Status
List of Invalid Modules in
Configuration
[Search Modules in GSDML] button
Production Time
3 GX Configurator-PN
88
3.1 Window Structure
Description
Displays the connection status between the RJ71PN92 and IO device.
Displays the PROFINET status.
• Status: Displays the status number.
• Description: Displays the description corresponding to the status number.
The values to be displayed are defined according to the PROFINET standard.
Displays mismatched module information when the configuration of the IO
devices set in GX Configurator-PN and the configuration of the actually
connected IO devices are different.
If the module information is displayed in the list, check the configuration of the
IO devices set in GX Configurator-PN.
The following items are displayed in this list.
• Configured identification Number: Displays the ID numbers of the modules.
• Real identification Number: Displays the ID numbers of the modules of the
actually connected IO devices.
• Module state: Displays the current status of each module of the actually
connected IO device.
Searches the information about mismatched modules detected in "List of
Invalid Modules in Configuration" from GSDML files and displays it on the
Web browser.
Displays the following information.
• Configured: Set I/O data exchange cycle
• Current: Actual I/O data exchange cycle
• Max: Maximum value of the I/O data exchange cycle after the start of
communications
• Min: Minimum value of the I/O data exchange cycle after the start of
communications
Setting range




