Backup With The Rj71Pn92 - Mitsubishi Electric MELSEC iQ-R Series User Manual

Backup with the RJ71PN92

The PROFINET module setting which is written in the RJ71PN92 can be read as a backup file and written to another
RJ71PN92.
The extension of the backup file is ".zip".
Note that the backup file cannot be checked in GX Configurator-PN.
This function is used when a project file of GX Works3 with the GX Configurator-PN setting is lost.
Operating procedure
The following describes the procedures of reading and writing a backup file.
■Reading a backup file (Upload Config. Image)
1.
Click "Upload Config. Image".
[Navigation window]  [Parameter]  [Module Information]  [RJ71PN92]  Right-click  [Upload Config. Image]
2.
Set a file name, select the save destination, and click the [Save] button.
3 GX Configurator-PN
102
3.3 GX Configurator-PN Backup File