Refresh Timing - Mitsubishi Electric MELSEC iQ-R Series User Manual

Refresh timing

Set the refresh timing in the module parameter.
[Navigation window]  [Parameter]  [Module Information]  [RJ71PN92]  [Module Parameter]  [Refresh Setting]
Item
Refresh Timing
Refresh Group[n](n: 1-64)
When the refresh is enabled, the refresh target values will be valid at the timing set in the engineering tool. At
the time, buffer memory areas are overwritten with the refresh target values.
To change the refresh target values in the buffer memory areas, create a program that changes the values in
the refresh target devices.
2 PARAMETER SETTINGS
58
2.4 Refresh Settings
Description
Set the refresh timing.
When "Refresh Timing" is set to "At the execution time of specified
program", specify the refresh group of programs.
Setting range
• At the Execution Time of END
Instruction
• At the execution time of specified
program
(Default: At the Execution Time of END
Instruction)
1 to 64
(Default: 1)