Table of Contents
Advertisement
Setting the phone to redial automatically [F53]
You can set the interval for redialing. If the attempt to dial is not successful, the
phone tries to redial it up to five times every three seconds.
1
Turn
to select Auto-Retry from the Extras menu, then push
The Auto-Retry menu appears.
2
Turn
to select on or off.
If you select off, the phone does not try to redial automatically.
3
Push
to enter the new setting.
The standby display reappears.
Setting the phone to answer automatically [F54]
You can set the phone to answer calls automatically. If you turn auto-answering on,
the phone answers incoming calls on the second ring when the phone is used in
conjunction with a hands-free car kit or a portable hands-free car kit.
1
Turn
to select Auto-Answer from the Extras menu, then push
The Auto-Answer menu appears.
2
Turn
to select on or off.
3
Push
to enter the new setting.
The standby display reappears.
The message -AutoAnswer- is displayed on the standby display when you
select on and the phone is in the hands-free car kit.
Using the scratch pad [F55]
Your phone has a scratch pad feature, which is useful for writing down phone
numbers temporarily. The phone doesn't send DTMF tone when you enter digits to
the scratch pad.
1
Turn
to select Scratch Pad from the Extras menu, then push
The Scratch Pad display appears, prompting you to enter a phone number.
2
Use the number buttons to enter the digits.
3
Push
.
The Options menu appears. Besides storing digits, you can enter hyphens,
pauses, and links (see page XX).
4
Turn
to select Store&Exit, then push
The information is stored as a scratch pad entry in the Calls List. When the
Calls List reaches more than 10 list items, the oldest entries will be deleted as
needed to make room for new entries.
5.3_CM_Z200
.
17
.
.
.
5.17
6/8/98, 9:28 AM
Advertisement
Table of Contents
