Sony D-WAVE Zuma CM Z200 Operating Instructions Manual page 23

7
Enter the new information.
Enter new information the same way you stored original information (see
page XX). The old information is overwritten.
8
When you are finished, push
A message confirms that your changes have been saved.
Tip
In addition, you can use the Directory menu to edit Phone Book numbers (see page XX).
Erasing a phone number
You can erase stored Phone Book entries. If the selected entry is restricted, you must
enter the four-digit lock code before you can erase it (see page XX).
1
On the standby display, turn
The first Phone Book entry is displayed.
2
Turn to find the Phone Book entry you want to erase.
The contents of the selected memory location are displayed.
3
Push .
The Options menu appears.
4
Turn to select Erase, then push
A message appears, prompting you to confirm the erasure.
5
Push again.
The selected entry is erased. After a few seconds, the standby display
reappears.
Tips
• You can also use the Directory menu to erase one Phone Book entry at a time (see page XX).
• Use the Security menu to erase all Phone Book entries at once (see page XX).
Restricting Phone Book entries
You can restrict individual Phone Book entries or the entire Phone Book so that
access can be gained only by entering a lock code (see page 74). The phone numbers
of restricted entries will not be displayed.
1
Select the Phone Book entry that you want to restrict, then push
The Options menu appears.
2
Turn to select Restrict, then push
The selected entry is displayed.
3
Push to restrict the selected entry.
Now the selected entry is restricted. After a few seconds, the standby
display reappears.
4.4
4_CM_Z200
.
down twice to select Phone Book.
–
.
.
4
.
6/8/98, 9:27 AM