Table of Contents
Advertisement
To erase a voice message
1
After reading a voice mail notification message, push
The Options menu appears.
2
Turn
to select Erase Msg, then push
The voice mail notification message is erased. The Message menu reappears,
indicating that there are currently no voice mail notification messages stored
in memory.
Reading new text messages [F12]
You can read both new and old messages stored in memory. Urgent messages are
listed above non-urgent ones, with the most recent entries first. After reading
messages, you can protect or erase them.
1
Turn
to select New Text from the Message menu, then push
The first message is displayed. An asterisk (*) indicates an urgent message.
If there are no new messages, this is indicated on the display. Push
return to the Message menu.
2
Turn
to scroll through the message.
If you do not scroll, the display automatically scrolls down. A hollow box ( )
indicates the end of the message.
3
To proceed to the next message, push
of the message.
The Options menu appears. To return to the standby display, press
4
Turn
to select Next Msg, then push
The next message is displayed. If there are no more messages, the Message
menu reappears.
To return to the previous message
In step 4 above, select Prev Msg from the Options menu.
Note
Once you reach the end of the message and go to the next message, the previous message
is stored as an old message.
Reading old text messages [F13]
The most recent messages are listed first.
1
Turn
to select Old Text from the Message menu, then push
A list of old messages is displayed. A dot (•) indicates the beginning of each
message. A lock icon ( ) indicates that the message is locked (see page XX).
If a number is too long to fit, an ellipsis (...) is used.
5.4
5.1_CM_Z200
.
when you reach the end
.
4
.
.
to
.
END
.
6/8/98, 9:27 AM
Advertisement
Table of Contents
