Table of Contents
Advertisement
Erasing a phone number [F43]
You can erase stored Phone Book entries. If the selected entry is restricted, you must
enter the four-digit lock code to erase it (see page XX).
1
Turn
to select Erase from the Directory menu, then push
A message appears, prompting you for the Phone Book entry to be erased.
2
Turn
to select the entry you want to erase, then push
A message appears, prompting you to confirm that the selected Phone Book
entry should be erased. In addition, you can use the number buttons to
select the entry to be erased.
3
Push
again.
The selected entry is erased. After a few seconds, the standby display
reappears.
Tips
• Also, you can use the Options menu to erase one Phone Book entry at a time (see page XX).
• Use the Security menu to erase all Phone Book entries at once (see page XX).
Editing stored information [F44]
You can edit the name, phone number, and memory location of specific entries
stored in the Phone Book. If the selected entry is restricted, you must enter the four-
digit lock code to edit it (see page XX).
1
Turn
to select Edit from the Directory menu, then push
A message appears, prompting you for the Phone Book entry to be edited.
2
Turn
to select the entry that contains the information you want
to edit.
In addition, you can use the number buttons to select the entry to be edited.
A message appears, prompting you to confirm that the selected Phone Book
entry should be edited.
3
Push
again.
The Edit menu appears.
4
Turn
to select the item you want to change, then push
You can change the name, phone number, or memory location by selecting
Name, Phone #, or Location #, respectively. The stored information that
corresponds to the selected item appears.
5
Enter the new information.
The old information is overwritten.
5.2_CM_Z200
13
.
.
.
.
5.13
6/8/98, 9:28 AM
Advertisement
Table of Contents
