Table of Contents
Advertisement
If the memory becomes full
The phone issues a warning when the memory is 75% full. At this point, you should
erase expendable messages (see page XX).
If the memory becomes completely full or your phone does not have enough
memory to receive an incoming message, new messages are rejected.
Accessing messages
1
Push
twice from the standby display.
The Message menu appears, indicating the number of the following types of
messages, respectively:
• Voice mail messages (see page XX).
• Unread text messages and pagings
(see page XX).
• Text messages and pagings that you have already read but are still stored
in memory (see page XX).
Reading voice mail notification messages [F11]
1
Push
to select Voice from the Message menu.
The Voice display appears, indicating the number of voice messages stored
in your voice mailbox. Press
2
Turn
to scroll through the message.
To dial a callback number
1
After reading a voice mail notification message, open the arm
microphone if it is closed. If the arm microphone is open, push
see the Options menu.
2
Push
again to dial the callback phone number.
The phone dials the callback phone number which is attached to the
message.
Tip
In addition, you can dial the callback number by pressing
or when reading a voice mail notification message if the arm microphone is open.
5.1_CM_Z200
to go back to the Message menu.
CLR
from the Messages display
SEND
3
to
5.3
6/8/98, 9:27 AM
Advertisement
Table of Contents
