Sony D-WAVE Zuma CM Z200 Operating Instructions Manual page 28

4
Push .
The entries containing the selected string are displayed starting from the
lowest memory location number.
5
Turn to view the next entry in the search string.
Note
If the search string does not contain punctuation or a space, the phone scans only the first
characters of the words in the matching entries.
Searching by memory location
The phone searches for a memory location that matches the entered digit(s), and
displays a list of options.
1
On the standby display, enter the memory location (a maximum of
two digits).
2
Push .
The Options menu appears.
3
+
Turn up to select Recall Loc#, then push
The Phone Book entry stored in the selected memory location is displayed.
If the entered location is empty, this is indicated on the display. After a few
seconds, the standby display reappears.
Tip
You can also use the Directory menu to search the Phone Book by memory location (see
page XX).
Searching for a phone number
The phone lists all entries that contain the entered digit(s).
1
On the standby display, enter at least three digits of the phone
number you want to find.
2
Push .
The Options menu appears.
3 +
Turn up to select Find Number, then push
The Phone Book lists and displays all entries matching the entered digits.
Depending on the Sort Book setting (see page XX), the entries are listed
either alphabetically or by memory location.
4
Turn to view the next entry that contains the search string.
If a matching Phone Book entry is not found, this is indicated on the display.
After a few seconds, the standby display reappears.
4_CM_Z200
.
.
9
4.9
6/8/98, 9:27 AM