Intelligent device station settings
Connect the engineering tool to the remote head module of the intelligent device station and set parameters.
1.
Create a project with the following settings.
[Project] [New]
2.
Set "Network Required Setting" of "CPU Parameter" of the remote head module as shown below.
[Navigation window] [Parameter] [RJ72GF15-T2] [CPU Parameter] [Network Required Setting]
3.
Add the pulse input module with the following settings.
[Navigation window] [Parameter] [Module Information] Right-click [Add New Module]
Appendix 4 Operation Examples of When the Remote Head Module Is Mounted
A
APPX
101