Procedure; Figure 18 G-240W-C Indoor Ont Connections - Nokia 7368 ISAM ONT G-240W-C Product Manual

7368 ISAM ONT G-240W-C Product Guide

6.6 Procedure

Use this procedure to replace a G-240W-C indoor ONT.
1
2
Figure 18 G-240W-C indoor ONT connections
Wall
mounting
hole
3
Issue: 01
R05.05.01 | December 2016 | 3FE 46690 AAAA TCZZA | Edition 01
Deactivate the ONT services at the P-OLT.
If you are using the SLID feature, this step is not required. The ONT and the services can
remain in service (IS).
i Use the RTRV-ONT command to verify the ONT status and th associated services.
Record the serial number or the SLID of the ONT displayed in the command output.
Example:
RTRV-ONT::ONT-1-1-1-1-1;
ii If the ONT is in service, place the ONT in OOS state.
Example:
ED-ONT::ONT-1-1-1-1-1;
If used, disable the Wi-Fi service by pressing the WLAN button; see Figure
of the WLAN button.
TEL1 TEL2
LAN1 LAN2 LAN3
POTS Ethernet
ports (2) ports (4) ports (2)
(RJ-11) (RJ-45)
Power down the unit by using the on/off power switch.
LAN4 USB1 USB2 POWER ON/OFF
WPS2.4G WLAN
WPS5G RESET
USB Wi-Fi Reset
security button
buttons
2.4G and 5G
Edition 01
Replace a G-240W-C indoor ONT
18 for the location
Wall
mounting
hole
Fiber optic
port
Wireless
on/off
button
On/off
button
Power
input
25272
63