Environmental Standard Compliance; Laser Product Standard Compliance; Resistibility Requirements Compliance; Acoustic Noise Emission Standard Compliance - Nokia 7368 ISAM ONT G-240W-C Product Manual

ETSI ONT safety guidelines
2.2.3
The ONT equipment complies with the EN 300 019 European environmental
standards.
2.2.4
For most ONTs, the ONT equipment complies with EN 60825-1 and IEC 60825-2 for
laser products. If there is an exception to this compliance regulation, you can find this
information in the standards compliance section of the unit data sheet in this Product
Guide.
2.2.5
The ONT equipment complies with the requirements of ITU Recommendation K.21
for resistibility of telecommunication equipment installed in customer premises to
over voltage and overcurrents.
2.2.6
The ONT equipment complies with EN 300 753 acoustic noise emission limit and test
methods.

2.3 Electrical safety guidelines

This section provides the electrical safety guidelines for the ONT equipment.
20
R05.05.01 | December 2016 | 3FE 46690 AAAA TCZZA | Edition 01

Environmental standard compliance

Laser product standard compliance

Resistibility requirements compliance

Acoustic noise emission standard compliance

The ONTs comply with the U.S. National Electrical
Note 1 —
Code. However, local electrical authorities have jurisdiction
when there are differences between the local and U.S.
standards.
The ONTs comply with BS EN 61140.
Note 2 —
7368 ISAM ONT G-240W-C Product Guide
Edition 01 Issue: 01