Configure a G-240W-C indoor ONT
3
4
Procedure 31
1
Figure 51
Table 41
2
3
108
R05.05.01 | December 2016 | 3FE 46690 AAAA TCZZA | Edition 01
Click Add Filter.
STOP. This procedure is complete.
DMZ and ALG configuration
Select Security > DMZ and ALG from the top-level menu in the GPON Home Gateway
window, as shown in Figure 51.
DMZ and ALG window
Table
41
describes the fields in the DMZ and ALG window.
DMZ and ALG parameters
Field
Description
ALG Config
Select the checkboxes to enable the protocols to be supported by the ALG: FTP,
TFTP, SIP, H323, RTSP, L2TP, IPSEC, PPTP
DMZ Config
WAN Connection List
Choose a WAN connection from the drop-down menu
Enable DMZ
Select this checkbox to enable DMZ on the chosen WAN connection
DMZ IP Address
Choose Customer Setting and enter the DMZ IP address or choose the IP address
of a connected device from the drop-down menu
Configure ALG.
Click Save ALG.
7368 ISAM ONT G-240W-C Product Guide
Edition 01
Issue: 01