Procedure - Nokia 7368 Product Manual

Install a G-240W-J indoor ONT

6.6 Procedure

Use this procedure to install a G-240W-J indoor ONT.
1
Mount the G-240W-J indoor ONT to a wall.
2
64
•
See the detailed specifications in the
for the temperature ranges for these ONTs.
Place the indoor ONT unit:
On a flat surface, such as a desk; go to step 3.
a
Note — The G-240W-J cannot be stacked with another ONT or with other
equipment. The ONT mounting requirements are:
•
allow a minimum 100 mm clearance above the top cover
•
allow a minimum 50 mm clearance from the side vents
•
do not place any heat source directly above the top cover or below the bottom
cover
On a wall; go to step
b
The G-240W-J indoor ONT must be mounted in a horizontal position, as indicated by the
wall mounting key holes in Figure 16.
Figure 16 shows the ONT with the connections and the key mounting holes.
3FE-48009-AAAA-TCZZA
7368 ISAM ONT G-240W-J Product Guide
.
2
G-240W-J unit data sheet
Issue: 01