Table of Contents
Advertisement
10
ASSEMBLY INSTRUCTIONS FOR EQUIPMENT OPTION 2
1. Connect the compressor blue outlet tube to Barbed Tube Fitting Reducing Tee (#1) and secure
with a hose clamp (#6).
2. Thread the Barbed Tubing Fitting Adapter (#10) to the gauge (3) using Teflon tape.
3. Connect the Tubing Fitting Adapter (#10) to the Reducing Tee (#1) using the High Pressure Tubing
(#4).
4. Install the High Pressure Clear Tubing (#9) to the Reducing Tee (#1) and the Needle Valve (#2)
and secure with hose clamps (#6).
5. Install the High Pressure Clear Tubing (#9) to the Needle Valve (#2)
6. Install the 1/8" Male Tube Adapter (#12) to the Flow Meter (#13) using Teflon tape.
7. Install the High Pressure Clear Tubing (#9) to the 3/8" Male Tube Adapter (#12) and secure with
a hose clamp (#6).
Page 28
1
LO TM
E
F
S
& T
VER
ERVICE
1
1
I
ECHNICAL
NFORMATION
8
1039055, VER. 06
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
