ABB ControlMaster CM15 User Manual page 69

ControlMaster CM15 and CMF160
Universal process indicator
...Functions / ...Math Blocks / ...Block Type
Multiplexer Setup:
Source 1
Source 1 Constant
Source 2
Source 2 Constant
Mux Selector
Square Root Setup:
Source 1
IM/CM/I–EN Rev. P
1
/ DIN
8
Selects the source (any analog signal [see page 94] or user-defined constant) for the first input
into the multiplexer.
Sets the constant value to be used.
Note. Applicable only if Source 1 is assigned to one of the constants
Select the source for the second input into the multiplexer.
Sets the constant value to be used.
Note. Applicable only if Source 1 is assigned to one of the Constants
Select the digital signal to be used to switch between the 2 multiplexer inputs.
'0' selects first input (Mux A Src); '1' selects second input (Mux B Src).
Selects the source of the parameter that requires square root to be applied – see Appendix A,
page 94 for description of sources.
7 Advanced Level
67