ControlMaster CM15 and CMF160
Universal process indicator
...Totalizer
Total DPs
Preset Count
Predet Count
Intermediate Count
Wrap Enable
Reset Source
Reset Days
Reset Hour
56
1
/
DIN
8
Selects the number of decimal places displayed on the totalizer value.
The value the totalizer counts from and the value applied when the totalizer is reset.
The value the totalizer stops or wraps.
The value the intermediate count digital signal is activated. This can be used as an alarm threshold
to indicate when the
Predet Count
If set to
the total is reset automatically to the
On
reached. The wrap digital signal is made active for a duration of 1 second.
If set to Off the count stops when the
active until the Totalizer is reset.
The source required to reset the totalizer value. Selection is made on the rising edge:
Reset
Selects the day or days to reset the totalizer.
Selects the hour to reset the totalizer (the totalizer is always reset exactly on the hour).
value is about to be reached.
Preset Count
value is reached. The wrap digital signal is made
Predet Count
7 Advanced Level
value once the
Predet Count
IM/CM/I–EN Rev. P
value is