Accessing The Connection Board - Cmf160 Indicator - ABB ControlMaster CM15 User Manual

ControlMaster CM15 and CMF160
Universal process indicator
4.4.3 Accessing the Connection board –
CMF160 Indicator
Note. Before fitting cable glands, identify the
connections required and cable gland entries to be
used.
Referring to Fig. 4.12:
1. Using a pozi-drive screwdriver, turn the (captive)
electronics section door retaining screw
counter-clockwise and open the door.
2. Turn the cover plate retaining screw
until the cover plate
3. Make connections to connection board terminals – see
Fig. 4.15, page 23.
C
4. Refit cover plate
B
screw clockwise until finger-tight. Close the door
and turn door retaining screw
secure.
IM/CM/I–EN Rev. P
1
/ DIN
8
A
B
anti-clockwise
C
can be removed.
and secure it by turning retaining
A 1
/ turn clockwise to
4
1
/ turn
4
Fig. 4.12 Accessing the CMF160 Indicator
Connection Board
4 Installation
19