ABB ControlMaster CM15 User Manual page 39

ControlMaster CM15 and CMF160
Universal process indicator
...Device Setup
Custom Config
Loop 1 PV
Volume 1
Loop 2 PV
Volume 2
IrDA Configuration
Setup
Select Mode
Off
Read-Only
Read/Write
Config. Description
IM/CM/I–EN Rev. P
1
/ DIN
8
Allows the device configuration to be backed-up (read) from the device, or written to the device
over the IrDA interface to a PC – see Section 9, page 85 – PC Configuration.
Sets the source for the (Loop 1) process variable.
Sets the source for Volume 1.
Sets the source for the (Loop 2) process variable.
Sets the source for Volume 2.
Allows the device configuration to be backed-up (read) from the device, or written to the device
over the IrDA interface to a PC – see Section 9, page 85 (PC Configuration).
Select the IrDA Configuration operating mode.
IrDA Configuration mode is turned off.
Enable reading of the device configuration.
Enable reading and writing of the device configuration.
A 24-character alphanumeric descriptor used to assist in identifying the configuration
that is read from or written to the device.
7 Advanced Level
37