Profile Error Codes - ABB ControlMaster CM15 User Manual

ControlMaster CM15 and CMF160
Universal process indicator
Error
Error Description
Code
152 Alarm Ack State 6
153 Alarm State 7
154 Alarm Ack State 7
155 Alarm State 8
156 Alarm Ack State 8
167 Analog O/P Loop break A1
168 Analog O/P Loop break B1
177 Delay Timer State 1
178 Delay Timer State 2
189 Toggle Signal
190 Edge Signal
98
1
/ DIN
8
B.2 Profile Error Codes
Error
Error Description
Code
1 Jump Target Invalid
Current active program is
configured to jump
to another program, upon the
completion of this action it is
found that the next program
has been configured
incorrectly.
2 Retort Rampback Invalid
Retort Rampback value is a
negative number and must
be changed.
3 Retort Previous Invalid
There is no previous segment
therefore the program is
unable to jump back to the
last ramp rate.
4 PV Invalid
The Process Variable has
failed.
Appendix B – Error Codes
Error
Error Description
Code
5 Local Setpoint has Failed
The Local setpoint has
become invalid. This may be
that it has travelled outside of
its permissible limits.
9 Validation
The current program is
configured incorrectly and
therefore judged invalid by
the software validation.
IM/CM/I–EN Rev. P