Executing A Sequence; Executing A Sequence With Com600 Webhmi - ABB COM600 series User Configuration Manual

6.
6.1.
60
COM600 series 5.1
Sequence Control Configuration Manual

Executing a sequence

Executing a sequence with COM600 WebHMI

Once the sequence configuration is completed and the COM600 runtime is updated with
the configuration, the COM600 WebHMI can be used to execute the sequence.
An example of a four-step sequence in the WebHMI is shown in Figure 4.8-2.
The buttons used in the execution are:
•
Start/Stop: Use this button to start or stop the sequence.
•
Execution mode: Use this button to change the execution mode of the sequence
between automatic and manual.
• Manual mode acknowledge: Use this button to manually acknowledge each step
when the sequence is run in manual mode.
• Execution on step error: Use this button to reset or continue the sequence execution
on a step failure.
The indicators related to steps are status-only objects, showing the status of each step
during the execution of the sequence.
Figure 6.1-1 An example of a four-step sequence in COM600 WebHMI
1MRS755001
4_step_sequence.png