Sequence Definition; Sequence Definition Using Logic Editor - ABB COM600 series User Configuration Manual

1MRS755001
4.
4.1.
COM600 series 5.1
Sequence Control Configuration Manual

Sequence definition

Sequence definition using Logic Editor

This section describes the steps involved in defining a sequence in Logic Processor.
The sequence logic runs in the Logic Processor (CoDeSys) programming environment
and it is implemented using IEC 61131- Structured Text programming language. The
sequence should be implemented as a standard PLC Sequence Flow Chat (SFC) program
within the logic processor environment.
To launch the Logic Editor, right-click the Logic Processor IED and select Logic Editor.
Figure 4.1-1 Launching Logic Editor
The Logic Editor opens with a default application that has a predefined PLC_PRG, POU
(Program Organization Unit).
SAB600_SC_Logic_Editor.png
19