ABB COM600 series User Configuration Manual page 58

Substation management units 5.1 sequence control

Hide thumbs Also See for COM600 series:

Table of Contents

COM600 series 5.1

Sequence Control Configuration Manual

Figure 5.6-1 Configuring the indication tab properties for a Multiple State Button showing

sequence idle status

4. In the Object Properties window, set the corresponding property values for the

sequence status control, see Figure 5.3-5.

Figure 5.6-2 Multi State Button object properties for a sequence status

5. Repeat the steps to add the status for individual steps in the sequence. Select the

appropriate data attribute path when configuring the indication properties for the

added Multiple State Button.

6. After completing the configuration, click Apply in the SLD Editor to save the

changes.

Table 5.6-1 Possible states for a sequence/sequence step

Data attribute value

1MRS755001

multiple_state_button_configuration.png

on_step_error_properties.png

Text

Idle

Running

Failed

Passed

Table of Contents