1-2
4
Test set status indications (see below):
a: Power on and self test
b: Battery pack status (if fitted)
c: Bluetooth
d: Aircraft status
5
ADTS Touch umbilical cable connector
6
External functional earth/ground terminal
7
Power On/Standby switch
8
Power cable connector
9
Fuses
4a 4b 4c 4d
Test set status indications:
4a
Power on and self test:
- Off (power Off)
- Standby (Yellow)
- Self test in progress (Green (flashing))
- Pass/Ready (Green)
- Fault (Red)
4b
Battery pack status (if fitted):
- For LED indications, see section 5.4 "ADTS5xxF battery pack"
4c
Bluetooth
- Wireless connection present (Blue)
- Looking for wireless connection (Flashing blue)
- Wired connection present (Wireless off)
4d
Aircraft status:
- When the ADTS is controlling the aircraft and it is "off ground", the LED
will be Yellow
- When the ADTS is controlling the aircraft to "going to ground", the LED
will flash yellow
- When the ADTS has made the aircraft "safe at ground", the LED is green
- In standby-mode, this LED will be off.
®
wireless technology connection status
®
wireless technology connection status:
ADTS542F/552F/553F/554F User Manual
K0553 Revision C