Set Time Panel - GE ADTS542F User Manual

ADTS542F/552F/553F/554F User Manual
3
2. On the "Set Time" panel, select the required "hours", "minutes" and "seconds" (2).
3. Touch the "Tick" icon (3), the Set Time panel closes and the new time is displayed in the Rate
Timer panel.
4. Touching the "Cross" icon (4), cancels the action and closes the Set Time panel.
To set the "TEST" period:
1. On the "Rate Timer" panel, touch "TEST" (5) to highlight it, the "Set Time" panel opens.
2. On the Set Time panel, select the required "hours", "minutes" and "seconds".
3. Touch the "Tick" icon, the Set Time panel closes and the new time is displayed in the Rate Timer
panel.
4. Touching the "Cross" icon, cancels the action and closes the Set Time panel.
To start and stop the Rate Timer:
1. To start the timer, touch the "play" icon (6). The timer starts counting down, the elapsed time
(percentage) indicator turns blue and the word "Wait" is displayed underneath the percentage
indication.
2. When the timer reaches 100%, it starts to count down again and the word "Test" is displayed
underneath the percentage indication. When the timer reaches 100%, it stops, the elapsed time
indicator remains blue and the word "End" is displayed. At the end of the timed testing period
the measured average rates of change are displayed for each channel with the capital letter "T"
as a suffix.
K0553 Revision C
Figure 3-8 Set time panel
3-9
2
4