Adts Touch-Er (Extended Range) Bluetooth - GE ADTS542F User Manual

3-44
3.15 ADTS TOUCH-ER (Extended Range) Bluetooth®
On large aircraft, particularly if situated out in the open away from buildings or other reflective
surfaces, Bluetooth® link performance can be impaired. The ADTS TOUCH-ER has been developed
for these instances.
This unit is the same as the standard ADTS TOUCH in every way with the exception of the
Bluetooth® antenna, which is provided as a removable antenna connected to an external RF
connector on the base of the unit.
The ADTS TOUCH-ER is provided with both a standard external antenna, and also an antenna
extension kit, which enables the antenna to be mounted directly on the inside of the cockpit
window using a suction cup assembly, and then connected to the RF connector on the body of the
ADTS TOUCH-ER using a cable. Both options allow the operator to move freely around the cockpit,
and the most appropriate option should be chosen by the operator at time of testing on the day
and aircraft concerned.
WARNING
A 20
T LEAST CM OF SEPARATION DISTANCE BETWEEN THE
'
USER S BODY MUST BE MAINTAINED AT ALL TIMES WHEN BEING USED WITH THE ANTENNA
EXTENSION KIT
BEFORE CONNECTING EXTENSION KIT TO THE
SEPARATION FROM BEING INFRINGED UPON
A
TTENTION
E
N UTILISANT LE KIT D
20
DE CM DOIT ÊTRE LAISSÉE ENTRE L
RESPECTER LES
VENTOUSE DE L
'
D EXTENSION AU
F 3-35 E
IGURE
. E
NSURE ANTENNA SUCTION CUP IS ATTACHED TO THE COCKPIT WINDOW
'
EXTENSION DE L
20
CM DE DISTANCE DE SÉCURITÉ
'
ANTENNE À LA VITRE DU COCKPIT ET CE AVANT DE CONNECTER LE KIT
TOUCH-ER.
ADTS542F/552F/553F/554F User Manual
B ® A
XTERNAL LUETOOTH
TOUCH-ER
TOUCH-ER
.
' ,
ANTENNE UNE DISTANCE DE SÉPARATION MINIMALE
' TOUCH-ER
ANTENNE
, '
L UTILISATEUR EST PRIÉ DE COLLER LA
NTENNA
ANTENNA AND THE
20
TO PREVENT THE CM
' . A
ET L UTILISATEUR FIN DE
K0553 Revision C