Table of Contents
Advertisement
34
www.electrolux.com
Problem
Steam and condensation
settle on the food and in
the cavity of the oven.
The display shows "C2".
The display shows "C3".
The display shows "F102". • You did not fully close
The display shows an error
code that is not in this ta‐
ble.
12.2 Service data
If you cannot find a solution to the
problem yourself, contact your dealer or
an Authorised Service Centre.
The necessary data for the service
centre is on the rating plate. The rating
We recommend that you write the data here:
Model (MOD.)
Product number (PNC)
Serial number (S.N.)
Possible cause
You left the dish in the
oven for too long.
You want to start the Pyrol‐
ysis or Defrost function, but
you did not remove the
core temperature sensor
plug from the socket.
The cleaning function does
not operate. You did not
fully close the door, or the
door lock is defective.
the door.
• The door lock is defec‐
tive.
There is an electrical fault.
plate is on the front frame of the oven
cavity. Do not remove the rating plate
from the oven cavity.
.........................................
.........................................
.........................................
Remedy
Do not leave the dishes in
the oven for longer than 15
- 20 minutes after the
cooking process ends.
Remove the core tempera‐
ture sensor plug from the
socket.
Fully close the door.
• Fully close the door.
• Deactivate the oven
with the house fuse or
the safety switch in the
fuse box and activate it
again.
• If the display shows
"F102" again, contact
the Customer Care De‐
partment.
• Deactivate the oven
with the house fuse or
the safety switch in the
fuse box and activate it
again.
• If the display shows the
error code again, con‐
tact the Customer Care
Department.
Advertisement
Table of Contents
