Pac8000 Profinet Scanner Versions - GE PAC8000 series User Manual

Contents

PAC8000 PROFINET Scanner Versions

1.2
The PNS network interface module is available in two versions to allow you to use the
network media that meet the requirements of your application.
The above PNS modules require the following carrier.
The PNS uses external 12V DC power supply. Optionally user can use two power supplies
having redundancy feature.
Note: The shield connections of RJ45 connectors on 8515-BI-PN module get connected to
the system ground through a capacitor internally, when the module is installed on the carrier.
8
8515-BI-PN: Two 10/100 Mbps copper RJ-45 media connectors supporting shielded
(refer Note below) and unshielded cables (CAT 5 and above)
8516-BI-PN: Two 100Mbps Multimode SC–Duplex fiber optic media connectors
8752-CA-NS: PAC8000 Node Service Carrier
PAC8000* IO PROFINET Scanner User's Manual–September 2017
GFK-2839B