Limitations - GE PAC8000 series User Manual

Contents

Limitations

5.3
The following features are not supported.
RT over UDP
IRT
Multicast communication
DHCP
DCP Hello service
DNS (Domain Name Service protocol)
FastStartUp
Supervisor-AR. Note: Supervisor-DA-AR is supported. (Device Access supported)
Optical power diagnostics (IC200PNS002)
CBA
Substitute Data
Only one Input-CR and one Output-CR are supported.
8515-BI-PN, 8
8516-BI-PN, 8
8752-CA-NS, 8
Automatic Restart
PAC8000 PROFINET Scanner, 41
Bussed field power supply(BFP)
monitoring, 12
Cables
clearance for, 21
Carriers
IO, 17
PNS, 17
Configuration
clearing, 37
getting started, 37
overview, 31
Controls and Indicators, 10
DIN rail, 23
Discovery and Configuration Protocol
(DCP), 37
Error Handling
PAC8000 PROFINET Scanner, 41
Ethernet Network Ports, 13
Fatal Error Blink Pattern, 28
Fatal error handling, 41
Faults
48
PAC8000* IO PROFINET Scanner User's Manual–September 2017
clearing, 44
module loss, add and mismatch, 45
Firmware Update Mode Blink Patterns, 28
Firmware updates
PAC8000 modules in remote node, 29
PAC8000 PROFINET Scanner, 29
Grounding, 25
Hazardous Locations, 22
Installation, 19
cables, 21
PAC8000 PROFINET Scanner, 19
replacing PROFINET Scanner
hardware, 37
IP addresses, 9
LEDs, 10
blink patterns, 28
operation, 27
MAC Addresses, 9
Media Redundancy Protocol (MRP), 16
Module Identification LED Pattern, 28
Modules, carriers, and power supplies, 17
Operating Temperature Range, 9
Output Control Bits
PAC8000 PROFINET Scanner, 38
PAC8000 Module Parameters
configuration, 36
PAC8000 PROFINET Scanner
GFK-2839B