Performance And Limitations; General Restrictions; Point Count Restrictions; Point Event Count Restrictions - GE PACSystems RX3i User Manual

Chapter 1. Introduction

1.8 Performance and Limitations

1.8.1 General Restrictions

Topic
Ethernet parameters

1.8.2 Point Count Restrictions

Maximum Point Counts
ADSU Maximum
Point Count
(in a Demo
Mode)
M_SP_NA_1 16
M_DP_NA_1
M_ST_NA_1
M_BO_NA_1
M_ME_NA_1
M_ME_NB_1
M_ME_NC_1
M_EP_TB_1 16
M_EP_TC_1 16

1.8.3 Point Event Count Restrictions

Maximum Event Counts
ADSU When SOE for this
ADSU is enabled
M_SP_NA_1 2000 (Default -1024)
M_DP_NA_1 2000 (Default -1024)
M_ST_NA_1 2000 (Default - 512)
M_BO_NA_1 2000 (Default -1024)
M_ME_NA_1 2000 (Default - 512)
M_ME_NB_1 2000 (Default - 512)
M_ME_NC_1 2000 (Default - 512)
M_EP_TB_1 2000 (Default - 512)
M_EP_TC_1 2000 (Default - 512)
10
Notes
The IEC 104 server application code is developed on top of the RX3i ETM001
platform and is configured as an IC695EIS001 in the PME hardware
configuration. The module is limited to IPV4 addressing and can accept
AUP file settings for module parameters. Refer to the PACSystems RX7i &
RX3i TCP/IP Ethernet Communications User Manual, GFK-2224 for more
information.
Maximum
Point Count
(when
licensed)
1024
8 512
8 512
8 512
8 512
8 512
8 512
1024
1024
Memory Restriction
Digital Memory Only
Digital Memory, where each 2 points takes a byte
Analog Memory, 16-bit width per point
Word Memory, 32-bit width per point.
Analog Memory, 16-bit width per point
Analog Memory, 16-bit width per point
Word Memory, 32-bit width per point, "REAL" type
Digital Memory Only (Only accessible through Point Push)
Digital Memory Only (Only accessible through Point Push)
PACSystems RX3i Ethernet 104 Server Module User Manual
Memory Restriction
Digital Memory Only
Digital Memory, where each 2 points is a byte
Analog Memory, 16-bit width per point
Word Memory, 32-bit width per point.
Analog Memory, 16-bit width per point
Analog Memory, 16-bit width per point
Word Memory, 32-bit width per point, "REAL" type
Only accessible through Point Push
Only accessible through Point Push
GFK-2949C