Moving A Nonfunctioning Machine; Transporting The Machine - Toro 23522 Operator's Manual

Moving a Nonfunctioning
Machine
1. Park the machine on a level surface and disengage the
blade-control clutch.
2. Engage the parking brake, shut off the engine, remove
the key, and wait for all moving parts to stop.
3. Move the bypass lever outward through the keyhole
and down to lock it in place.
4. Disengage the parking brake.
5. Push the machine as required.
6. Engage the parking brake.
7. Move the bypass lever up and inward through the
keyhole to disengage the bypass.
Figure 16

Transporting the Machine

Use a heavy-duty trailer or truck to transport the machine.
Ensure that the trailer or truck has all necessary brakes,
lighting, and marking as required by law. Please carefully read
all the safety instructions. Knowing this information could
help you, your family, pets, or bystanders avoid injury.
1. If using a trailer, connect it to the towing vehicle and
connect the safety chains.
2. If applicable, connect the trailer brakes.
3. Load the machine onto the trailer or truck.
4. Shut off the engine, remove the key, engage the parking
brake, and close the fuel valve.
5. Use the brush bar and 2 tie-down loops on the machine
to securely fasten the machine to the trailer or truck
with straps, chains, cable, or ropes
g188886
g188887
1. Left tie-down loop
16
(Figure 17).
Figure 17
2. Brush bar
g188889