Table of Contents
Advertisement
Moving a Nonfunctioning
Machine
1.
Park the machine on a level surface and
disengage the blade-control clutch.
2.
Engage the parking brake, shut off the engine,
remove the key, and wait for all moving parts
to stop.
3.
Move the bypass lever outward through the
keyhole and down to lock it in place.
4.
Disengage the parking brake.
5.
Push the machine as required.
6.
Engage the parking brake.
7.
Move the bypass lever up and inward through
the keyhole to disengage the bypass.
Figure 14
Transporting the Machine
Use a heavy-duty trailer or truck to transport the
machine. Ensure that the trailer or truck has all
necessary brakes, lighting, and marking as required
by law. Please carefully read all the safety instructions.
Knowing this information could help you, your family,
pets, or bystanders avoid injury.
1.
If using a trailer, connect it to the towing vehicle
and connect the safety chains.
2.
If applicable, connect the trailer brakes.
3.
Load the machine onto the trailer or truck.
4.
Shut off the engine, remove the key, engage the
parking brake, and close the fuel valve.
5.
Use the brush bar and 2 tie-down loops on the
machine to securely fasten the machine to the
trailer or truck with straps, chains, cable, or
ropes
(Figure
1. Left tie-down loop
g188886
g188887
14
15).
Figure 15
2. Brush bar
g188889
Advertisement
Table of Contents
